
CASE STUDY | TECHNICAL DECOMMISSIONING
Laboratory Decommissioning and Localized Restoration
ASI coordinated laboratory exhaust removal, electrical and low-voltage work, localized wall repairs and debranding at Stantec's Louisville workplace.
View Full Case Study PDF
Overview
Challenge
Laboratory exhaust assemblies crossed several building systems. Hoods, ductwork, supports, electrical connections and wall penetrations had to be addressed together, while retained cabinets, worktops and building finishes remained in place.
ASI approach
ASI coordinated technical removals with localized sheetrock and masonry repairs. The assignment also included hanging laboratory cabinet removal, low-voltage removal and interior and exterior debranding.
Results
- Laboratory exhaust assemblies removed
- Affected wall openings closed and prepared
- Laboratory wall areas and branding addressed
Laboratory wall and retained fixtures
TARGETED REMOVALS. RETAINED BUILDING ELEMENTS.
Hanging laboratory cabinets were removed and affected wall areas were patched and prepared. Lower cabinetry, sinks and worktops remained, making the boundaries between removed and retained elements central to the work.
Coordinated field delivery
FOLLOW THE REMOVAL INTERFACES
Removing exhaust equipment exposed wall penetrations and attachment points that needed separate treatment. The work linked dismantling with the associated electrical interfaces and localized closure of affected openings.
WORK AROUND WHAT REMAINS
Local wall preparation followed removal of hanging cabinets. Retained lower cabinets, worktops, ceiling structures and surrounding finishes defined the limits of the restoration work.
The outcome
SYSTEMS REMOVED. AFFECTED SURFACES ADDRESSED.
ASI brought laboratory decommissioning, electrical and low-voltage coordination, local wall repairs and debranding together at Stantec's Louisville workplace.
Interdependent technical scopes
Mechanical removals, related electrical work and low-voltage removal were coordinated within one field assignment.
Additional concealed conditions
The revised scope addressed further insertion points identified during removal, extending the localized repair work.
Defined restoration boundaries
Repairs focused on affected penetrations and mounting areas, with surrounding building elements retained.
Debranding alongside removal
Interior and exterior Stantec signage was removed as part of the workplace exit work.
Field execution
TECHNICAL REMOVALS. LOCALIZED REPAIRS.
The views show the exhaust assembly before removal, the closed wall area afterward, low-voltage removal underway and the exterior opening following localized repair.

Read the full case study.
Download PDF
One accountable partner.
PLANNING A TECHNICAL WORKPLACE EXIT?
ASI coordinated interdependent removals and localized restoration at a laboratory workplace, with clear boundaries around retained building elements.
Start a Project





